HIKVISION IDS-2CD7546G0-IZHSY 8-32 MM, User Manual, Page: 64 / 112

Network Camera User Manual
UM Network Camera User Manual 071421NA 64
Before You Start
Complete the operation within 120 seconds, otherwise the connection will fail.
Steps
1. Go to the TCP/IP settings page: Configuration → Network → Basic Configuration → TCP/IP.
2. Select Wlan to set the parameters. Refer to
TCP/IP for detailed configuration.
NOTE:
For stable use of Wi-Fi, it is not recommended to use DHCP.
3. Go to the Wi-Fi settings page: Configuration → Network → Advanced Configuration → Wi-Fi.
4. Set the Wi-Fi parameters.
1) Check
Enable WPS
.
2) Select
PBC connection
.
3) Check the Wi-Fi router to see if there is a WPS button. If there is, push the button and you will see
the indicator near the button start flashing, which means the WPS function of the router is
enabled. For detailed operation, see the router user guide.
4) Push the WPS button to enable the function on the camera. If there is not a WPS button on the
camera, you can also click the virtual button to enable the PBC function on the Web interface.
5) Click Connect .
5. Click
Save
.
6. Set PBC code for wireless router or AP.
•
Press the WPS or QSS button on the wireless router or AP within 120 seconds to quickly complete
the connection.
•
Refer to the router or AP user guide to set PBC code.
7. Go to TCP/IP setting page: Configuration → Network → Basic Configuration → TCP/IP , and click Wlan to
check the IPv4 Address and log in the device.
•
Input the IP address in the browser to access the device.
• Add the device in the client application. Select IP/Domain , and input the IP address and other
parameters to access the device.
Use PIN on Device : The device can automatically connect the network by setting the device PIN code
parameters in wireless router or AP via WPS or QSS protocols.
Steps
1. Go to the TCP/IP settings page: Configuration → Network → Basic Configuration → TCP/IP.
2. Select Wlan to set the parameters. Refer to
TCP/IP for detailed configuration.