HIKVISION DS-K5671-3XF Series, User Manual

Page: 59 / 154

Table 7-1 Temperature Measurement Parameters Descriptions
Parameter Description
Temp. Detection When enabling the function, the device will authenticate the
permissions and at the same time take the temperature. When
disabling the device, the device will authenticate the
permissions only.
Norm Temp. (Max./Min.) Edit the threshold according to actual situation. If the detected
temperature is higher or lower than the configured parameters,
an alarm will be triggered. By default, the value is 37.3°.
Temp. Compensation If the measured temperature is higher/lower than the actual
object's temperature, you can set the compensation
temperature here. Available range: -99 °C to 99 °C
Door Not Open (Abnormal
Temp.)
When enabling the function, the door will not open when the
detected temperature is higher or lower than the configured
temperature threshold. By default, the function is enabled.
Temperature Measurement
Only
When enabling the function, the device will not authenticate the
permissions, but only take the temperature. When disabling the
function, the device will authenticate the permissions and at the
same time take the temperature.
Unit Select a temperature unit according to your preference.
Measurement Area Calibration Configure the temperature measurement area.
7.5 Data Management
You can delete data, import data, and export data.
7.5.1 Delete Data
Delete user data.
On the Home page, tap Data → Delete Data → User Data . All user data added in the device will be
deleted.
7.5.2 Import Data
Steps
1. Plug a USB flash drive in the device.
DS-K5671-3XF Series Face Recognition Terminal User Manual
45