HIKVISION DS-K5671-3XF Series User Manual Download

Page: 73 / 154

Figure 7-16 Manual and Auto Mode

3. Enable the Attendance Status function.
4. Enable a group of attendance status.

Note

The Attendance Property will not be changed.

5. Optional: Select an status and change its name if required.

The name will be displayed on the T & A Status page and the authentication result page.

6. Set the status' schedule.

1) Tap Attendance Schedule.

2) Select Monday, Tuesday, Wednesday, Thursday, Friday, Saturday, or Sunday.

3) Set the selected attendance status's start time of the day.

4) Tap OK.

5) Repeat step 1 to 4 according to your actual needs.

DS-K5671-3XF Series Face Recognition Terminal User Manual

Summary of Contents for DS-K5671-3XF Series



























































































































































Search results

Summary of Contents for DS-K5671-3XF Series

Reviews:

Related manuals for DS-K5671-3XF Series

Brands by name

Popular brands

HIKVISION DS-K5671-3XF Series, User Manual

Search results

Summary of Contents for DS-K5671-3XF Series

Reviews:

Related manuals for DS-K5671-3XF Series

Brands by name

Popular brands