HIKVISION DS-K5671-3XF Series, User Manual

Page: 109 / 154

Figure 8-14 Wiegand Page
2. Check Wiegand to enable the Wiegand function.
3. Set a transmission direction.
Input
The device can connect a Wiegand card reader.
Output
The can connect an external access controller. And the two devices will transmit the card No.
via Wiegand 26 or 34.
4. Click Save to save the settings.
Note
If you change the peripheral, and after you save the device parameters, the device will reboot
automatically.
Set Face Recognition Parameters
You can set face recognition parameters for accessing.
Click Configuration → Access Control → Face Recognition Parameters .
You can set Working Mode as Access Control Mode. The access control mode is the device normal
mode. You should authenticate your credential for accessing.
Set Privacy Parameters
Set the event storage type, picture upload and storage parameters, and the picture clearing
parameters.
Go to Configuration → Access Control → Privacy
DS-K5671-3XF Series Face Recognition Terminal User Manual
95