HIKVISION DS-7104NI-SL User Manual Download

Page: 9 / 214

User Manual of Network Video Recorder



Support accessing by the platform via ONVIF.



Remote search, playback, download, locking and unlocking of the record files, and the breakpoint resume

is supported for downloading files.



Remote parameters setup; remote import/export of device parameters.



Remote viewing of the device status, system logs and alarm status.



Remote keyboard operation.



Remote locking and unlocking of control panel and mouse.



Remote HDD formatting and program upgrading.



Remote system restart and shutdown.



RS-232, RS-485 transparent channel transmission (depending on models).



Alarm and exception information can be sent to the remote host



Remotely start/stop recording.



Remotely start/stop alarm output.



Remote PTZ control (depending on models).



Remote JPEG capture.



Two-way audio and voice broadcasting.



Embedded WEB server.

Development Scalability:



SDK for Windows and Linux system.



Source code of application software for demo.



Development support and training for application system.

Summary of Contents for DS-7104NI-SL























































































































































































































Search results

Summary of Contents for DS-7104NI-SL

Reviews:

Related manuals for DS-7104NI-SL

Brands by name

Popular brands

HIKVISION DS-7104NI-SL, User Manual

Search results

Summary of Contents for DS-7104NI-SL

Reviews:

Related manuals for DS-7104NI-SL

Brands by name

Popular brands