HIKVISION DS-7104NI-SL User Manual Download

Page: 109 / 214

User Manual of Network Video Recorder

108

Figure 7. 9

Result of Normal Video Search for Backup

Export.

Click

Export

button and start backup.

If the inserted USB writer or SATA writer is not recognized:

•

Click the

Refresh

button.

•

Reconnect device.

•

Check for compatibility from vendor.

Figure 7. 10

Export by Normal Video Search using USB Writer

Stay in the Exporting interface until all record files are exported with pop-up message box “Export finished”.

Check backup result.

Choose the record file in Export interface and click button

to check it.

The Player player.exe will be exported automatically during record file export.

Summary of Contents for DS-7104NI-SL























































































































































































































Search results

Summary of Contents for DS-7104NI-SL

Reviews:

Related manuals for DS-7104NI-SL

Brands by name

Popular brands

HIKVISION DS-7104NI-SL, User Manual

Search results

Summary of Contents for DS-7104NI-SL

Reviews:

Related manuals for DS-7104NI-SL

Brands by name

Popular brands