HIKVISION DS-7104NI-SL User Manual Download

Page: 159 / 214

User Manual of Network Video Recorder

158

Figure 10. 8

Add NAS Disk

•

Add IP SAN:

Enter the NetHDD IP address in the text field.

Click the

Search

button to search the available IP SAN disks.

Select the IP SAN disk from the list shown below.

Click the

button to add the selected IP SAN disk.

Up to 1 IP SAN disk can be added.

Figure 10. 9

Add IP SAN Disk

After having successfully added the NAS or IP SAN disk, return to the HDD Information menu. The added

NetHDD will be displayed in the list.

If the added NetHDD is uninitialized, please select it and click the

Init

button for initialization.

Summary of Contents for DS-7104NI-SL























































































































































































































Search results

Summary of Contents for DS-7104NI-SL

Reviews:

Related manuals for DS-7104NI-SL

Brands by name

Popular brands

HIKVISION DS-7104NI-SL, User Manual

Search results

Summary of Contents for DS-7104NI-SL

Reviews:

Related manuals for DS-7104NI-SL

Brands by name

Popular brands