HIKVISION DS-7104NI-SL User Manual Download

Page: 66 / 214

User Manual of Network Video Recorder

Figure 4. 12

PTZ Panel - One-touch

There are 3 one-touch park types selectable, click the corresponding button to activate the park action.

Park (Quick Patrol):

The dome starts patrol from the predefined preset 1 to preset 32 in order after the park

time. The undefined preset will be skipped.

Park (Patrol 1):

The dome starts move according to the predefined patrol 1 path after the park time.

Park (Preset 1):

The dome moves to the predefined preset 1 location after the park time.

The park time can only be set through the speed dome configuration interface, by default the value is 5s.

Click the button again to inactivate it.

Summary of Contents for DS-7104NI-SL























































































































































































































Search results

Summary of Contents for DS-7104NI-SL

Reviews:

Related manuals for DS-7104NI-SL

Brands by name

Popular brands

HIKVISION DS-7104NI-SL, User Manual

Search results

Summary of Contents for DS-7104NI-SL

Reviews:

Related manuals for DS-7104NI-SL

Brands by name

Popular brands