HIKVISION DS-7104NI-SL User Manual Download

Page: 84 / 214

User Manual of Network Video Recorder

5.10

Files Protection

Purpose:

You can lock the recorded files or set the HDD property to Read-only to protect the record files from being

overwritten.

Protect file by locking the record files:

Steps:

Enter Export setting interface.

Menu> Export

Figure 5. 26

Export

Select the channels you want to investigate by checking the checkbox to

Configure the record type, file type start/end time.

Click

Search

to show the results.

Figure 5. 27

Export- Search Result

Protect the record files.

Find the record files you want to protect, and then click the

icon which will turn to

, indicating

that the file is locked.

The record files of which the recording is still not completed cannot be locked.

Click

to change it to

to unlock the file and the file is not protected.

Summary of Contents for DS-7104NI-SL























































































































































































































Search results

Summary of Contents for DS-7104NI-SL

Reviews:

Related manuals for DS-7104NI-SL

Brands by name

Popular brands

HIKVISION DS-7104NI-SL, User Manual

Search results

Summary of Contents for DS-7104NI-SL

Reviews:

Related manuals for DS-7104NI-SL

Brands by name

Popular brands