HIKVISION DS-7104NI-SL User Manual Download

Page: 115 / 214

User Manual of Network Video Recorder

114

If the inserted USB device is not recognized:

•

Click the

Refresh

button.

•

Reconnect device.

•

Check for compatibility from vendor.

Figure 7. 21

USB Flash Drive Management

Management of USB writers and DVD-R/W

The DVD-R/W is not supported by DS-7100NI-SL, DS-7100NI-SN and DS-7600NI-SN series NVR.

Enter Search Result interface of record files.

Menu>Export>Normal

Set search condition and click

Search

button to enter Search Result interface.

At least one channel shall be selected.

Figure 7. 22

Normal Video Search for Backup

Select record files you want to back up.

Click

Export All

button to export all the recording files.

Or you can select recording files you want to back up, and click

Export

button to enter Export interface.

At least one recording file shall be selected.

Summary of Contents for DS-7104NI-SL























































































































































































































Search results

Summary of Contents for DS-7104NI-SL

Reviews:

Related manuals for DS-7104NI-SL

Brands by name

Popular brands

HIKVISION DS-7104NI-SL, User Manual

Search results

Summary of Contents for DS-7104NI-SL

Reviews:

Related manuals for DS-7104NI-SL

Brands by name

Popular brands