HIKVISION DS-7104NI-SL User Manual Download

Page: 50 / 214

User Manual of Network Video Recorder

3.2

Operations in Live View Mode

In live view mode, there are many functions provided. The functions are listed below.

•

Single Screen

: showing only one screen on the monitor.

•

Multi-screen:

showing multiple screens on the monitor simultaneously.

•

Auto-switch:

the screen is auto switched to the next one. And you must set the dwell time for each screen on

the configuration menu before enabling the auto-switch.

Menu>Configuration>Live View>Dwell Time.

•

Start Recording:

continuous record and motion detection record are supported.

•

Output Mode:

select the output mode to Standard, Bright, Gentle or Vivid.

•

Add IP Camera:

the shortcut to the IP camera management interface.

•

Playback:

playback the recorded videos for current day.

3.2.1

Using the Mouse in Live View

Table 3. 2

Mouse Operation in Live View

Name

Description

Menu

Enter the main menu of the system by right clicking the mouse.

Single Screen

Switch to the single full screen by choosing channel number from the dropdown

list.

Multi-screen

Adjust the screen layout by choosing from the dropdown list.

Previous Screen

Switch to the previous screen.

Next Screen

Switch to the next screen.

Start/Stop Auto-switch

Enable/disable the auto-switch of the screens.

Start Recording

Start continuous recording or motion detection recording of all channels.

Add IP Camera

Enter the IP Camera Management interface, and manage the cameras.

Playback

Enter the playback interface and start playing back the video of the selected

channel immediately.

Output Mode

Four modes of output supported, including Standard, Bright, Gentle and Vivid.



The

dwell time

of the live view configuration must be set before using

Start Auto-switch



If the corresponding camera supports intelligent function, the Reboot Intelligence option is included when

right-clicking mouse on this camera.

Summary of Contents for DS-7104NI-SL























































































































































































































Search results

Summary of Contents for DS-7104NI-SL

Reviews:

Related manuals for DS-7104NI-SL

Brands by name

Popular brands

HIKVISION DS-7104NI-SL, User Manual

Search results

Summary of Contents for DS-7104NI-SL

Reviews:

Related manuals for DS-7104NI-SL

Brands by name

Popular brands