HIKVISION DS-7104NI-SL User Manual Download

Page: 107 / 214

User Manual of Network Video Recorder

106

Figure 7. 5

Result of Normal Video Search for Backup

Export.

Click

Export All

button to export all the recording files.

Or you can select recording files you want to back up, and click

Export

button to enter Export interface.

If the inserted USB device is not recognized:

•

Click the

Refresh

button.

•

Reconnect device.

•

Check for compatibility from vendor.

You can also format USB flash drives or USB HDDs via the device.

Figure 7. 6

Export by Normal Video Search using USB Flash Drive

Stay in the Exporting interface until all record files are exported with pop-up message box “Export finished”.

Check backup result.

Choose the record file in Export interface and click button

to check it.

The Player player.exe will be exported automatically during record file export.

Summary of Contents for DS-7104NI-SL























































































































































































































Search results

Summary of Contents for DS-7104NI-SL

Reviews:

Related manuals for DS-7104NI-SL

Brands by name

Popular brands

HIKVISION DS-7104NI-SL, User Manual

Search results

Summary of Contents for DS-7104NI-SL

Reviews:

Related manuals for DS-7104NI-SL

Brands by name

Popular brands