HIKVISION DS-7104NI-SL User Manual Download

Page: 85 / 214

User Manual of Network Video Recorder

Figure 5. 28

Unlocking Attention

Protect file by setting HDD property to Read-only

Steps:

Enter HDD setting interface.

Menu> HDD

Figure 5. 29

HDD General

Click

to edit the HDD you want to protect.

Figure 5. 30

HDD General- Editing

To edit HDD property, you need to set the storage mode of the HDD to Group. See

Chapter

Managing HDD

Group.

Set the HDD property to Read-only.

Click

to save settings and back to the upper level menu.



You cannot save any files in a Read-only HDD. If you want to save files in the HDD, change the

property to R/W.



If there is only one HDD and is set to Read-only, the NVR can’t record any files. Only live view mode is

Summary of Contents for DS-7104NI-SL























































































































































































































Search results

Summary of Contents for DS-7104NI-SL

Reviews:

Related manuals for DS-7104NI-SL

Brands by name

Popular brands

HIKVISION DS-7104NI-SL, User Manual

Search results

Summary of Contents for DS-7104NI-SL

Reviews:

Related manuals for DS-7104NI-SL

Brands by name

Popular brands