HIKVISION DS-7104HGHI-SH User Manual Download

Page: 95 / 242

Digital Video Recorder User Manual

5.10

Files Protection

Purpose:

You can lock the recorded files or set the HDD property to Read-only to protect the record files from being

overwritten.

Protect file by locking the record files

Steps:

Enter Playback setting interface.

Menu> Export

Figure 5. 29

Export

Select the channels you want to investigate by checking the checkbox to

Configure the record type, file type, start time and end time.

Click

Search

to show the results.

Figure 5. 30

Export- Search Result

Protect the record files.

Find the record files you want to protect, and then click the

icon which will turn to

, indicating

that the file is locked.

The record files of which the recording is still not completed cannot be locked.

Click

to change it to

to unlock the file and the file is not protected.

Protect file by setting HDD property to Read-only

Before you start:

Summary of Contents for DS-7104HGHI-SH



















































































































































































































































Search results

Summary of Contents for DS-7104HGHI-SH

Reviews:

Related manuals for DS-7104HGHI-SH

Brands by name

Popular brands

HIKVISION DS-7104HGHI-SH, User Manual

Search results

Summary of Contents for DS-7104HGHI-SH

Reviews:

Related manuals for DS-7104HGHI-SH

Brands by name

Popular brands