HIKVISION DS-7104HGHI-SH User Manual Download

Page: 204 / 242

Digital Video Recorder User Manual

203

14.2

Configuring Privacy Mask

Purpose:

You are allowed to configure the four-sided privacy mask zones that cannot be viewed or recorded by the operator.

Steps:

Enter the Privacy Mask Settings interface.

Menu > Camera > Privacy Mask

Select the camera to set privacy mask.

Check the checkbox of

Enable Privacy Mask

to enable this feature.

Figure 14. 3

Privacy Mask Settings Interface

Use the mouse to draw a zone on the window. The zones will be marked with different frame colors.

Up to 4 privacy mask zones can be configured, and the size of each area can be adjusted.

The configured privacy mask zones on the window can be cleared by clicking the corresponding Clear

Zone1-4 icons on the right side of the window, or click

Clear All

to clear all zones.

Figure 14. 4

Set Privacy Mask Area

You can click the

Copy

button to copy the privacy mask settings of the current camera to other cameras.

Please refer to step 7 of

Chapter Chapter 14 Configuring OSD Settings

Click the

Apply

button to save the settings.

Summary of Contents for DS-7104HGHI-SH



















































































































































































































































Search results

Summary of Contents for DS-7104HGHI-SH

Reviews:

Related manuals for DS-7104HGHI-SH

Brands by name

Popular brands

HIKVISION DS-7104HGHI-SH, User Manual

Search results

Summary of Contents for DS-7104HGHI-SH

Reviews:

Related manuals for DS-7104HGHI-SH

Brands by name

Popular brands