HIKVISION DS-7104HGHI-SH User Manual Download Page 110

Page: 110 / 242

Digital Video Recorder User Manual

109

Figure 6. 18

Interface of Sub-periods Playback

According to the defined number of split-screens, the video files on the selected date can be divided into average

segments for playback. E.g., if there are video files existing between 16:00 and 22:00, and the 6-screen display

mode is selected, then it can play the video files for 1 hour on each screen simultaneously.

6.1.8

Playing Back External File

Purpose:

Perform the following steps to look up and play back files in the external devices.

Steps:

Enter the Playback interface.

Menu>Playback

Select the

External File

in the drop-down list on the top-left side.

The files are listed in the right-side list.

You can click the

button to refresh the file list.

Select and click the

button to play back it.

Summary of Contents for DS-7104HGHI-SH



















































































































































































































































Search results

Summary of Contents for DS-7104HGHI-SH

Reviews:

Related manuals for DS-7104HGHI-SH

Brands by name

Popular brands

HIKVISION DS-7104HGHI-SH, User Manual

Search results

Summary of Contents for DS-7104HGHI-SH

Reviews:

Related manuals for DS-7104HGHI-SH

Brands by name

Popular brands