HIKVISION DS-7104HGHI-SH User Manual Download

Page: 111 / 242

Digital Video Recorder User Manual

110

Figure 6. 19

Interface of External File Playback

6.2

Auxiliary Functions of Playback

6.2.1

Playing Back Frame by Frame

Purpose:

Play video files frame by frame, in order to check image details of the video when abnormal events happen.

Steps:

•

Using a Mouse

Go to Playback interface and click button

until the speed changes to

Single

frame. One click on the

playback screen represents playback or adverse playback of one frame. It is also feasible to use button in
toolbar.

•

Using the front panel (Not supported by DS-7100-SH and DS-7200HGHI-SH)

Press the

button to set the speed to

Single

frame. One click on the playback screen or press

button on

the front panel represents playback or adverse playback of one frame.

6.2.2

Digital Zoom

Steps:

Click the

button on the playback control bar to enter Digital Zoom interface.

Use the mouse to draw a red rectangle and the image within it will be enlarged up to 16 times.

Summary of Contents for DS-7104HGHI-SH



















































































































































































































































Search results

Summary of Contents for DS-7104HGHI-SH

Reviews:

Related manuals for DS-7104HGHI-SH

Brands by name

Popular brands

HIKVISION DS-7104HGHI-SH, User Manual

Search results

Summary of Contents for DS-7104HGHI-SH

Reviews:

Related manuals for DS-7104HGHI-SH

Brands by name

Popular brands