HIKVISION DS-7104HGHI-SH, User Manual

Page: 167 / 242

Digital Video Recorder User Manual
166
1) Click to activate the External Port Settings dialog box. Configure the external port No. for server
port, http port and RTSP port respectively.
 You can use the default port No., or change it according to actual requirements.
 External Port indicates the port No. for port mapping in the router.
 The value of the RTSP port No. should be 554 or between 1024 and 65535, while the value of the
other ports should be between 1 and 65535 and the value must be different from each other. If
multiple devices are configured for the UPnP™ settings under the same router, the value of the
port No. for each device should be unique.
Figure 11. 16 External Port Settings Dialog Box
2) Click Apply button to save the settings.
3) You can click Refresh button to get the latest status of the port mapping.
Figure 11. 17 UPnP ™ Settings Finished-Manual
11.2.6 Configuring More Settings
Steps:
1. Enter the Network Settings interface.
Menu > Configuration > Network
2. Select the More Settings tab to enter the More Settings interface.
Figure 11. 18 More Settings Interface
3. Configure the remote alarm host, server port, HTTP port, multicast, RTSP port.
 Alarm Host IP/Port : With a remote alarm host configured, the device will send the alarm event or