HIKVISION DS-7104HGHI-SH User Manual Download

Page: 214 / 242

Digital Video Recorder User Manual

213

15.6

Restoring Default Settings

Steps:

Enter the Default interface.

Menu > Maintenance > Default

Figure 15. 8

Restore Defaults

Select the restoring type from the following three options.

Restore Defaults:

Restore all parameters, except the network (including IP address, subnet mask, gateway,

MTU, NIC working mode, default route, server port, etc.) and user account parameters, to the factory default

settings.

Factory Defaults:

Restore all parameters to the factory default settings.

Restore to Inactive:

Restore the device to the inactive status.

Click the

button to restore the default settings.

The device will reboot automatically after restoring to the default settings.

Summary of Contents for DS-7104HGHI-SH



















































































































































































































































Search results

Summary of Contents for DS-7104HGHI-SH

Reviews:

Related manuals for DS-7104HGHI-SH

Brands by name

Popular brands

HIKVISION DS-7104HGHI-SH, User Manual

Search results

Summary of Contents for DS-7104HGHI-SH

Reviews:

Related manuals for DS-7104HGHI-SH

Brands by name

Popular brands