HIKVISION DS-7104HGHI-SH User Manual Download Page 223

Page: 223 / 242

Digital Video Recorder User Manual

222

•

Remote PTZ Control: Remotely controlling PTZ movement of the selected camera (s).

•

Local Video Export: Locally exporting recorded files of the selected camera (s).

Local Camera Management is provided for the IP cameras only.

(3)

Click

to save the settings and exit.

16.5.2

Deleting a User

Steps:

Enter the User Management interface.

Menu >Configuration>User

Select the user to be deleted from the list, as shown in Figure 16. 9.

Figure 16. 9

User List

Click the

icon to delete the selected user account.

16.5.3

Editing a User

For the added user accounts, you can edit the parameters.

Steps:

Enter the User Management interface.

Menu >Configuration>User

Select the user to be edited from the list, as shown in Figure 16. 9.

Click the

icon to enter the Edit User interface, as shown in Figure 16. 10.

Summary of Contents for DS-7104HGHI-SH



















































































































































































































































Search results

Summary of Contents for DS-7104HGHI-SH

Reviews:

Related manuals for DS-7104HGHI-SH

Brands by name

Popular brands

HIKVISION DS-7104HGHI-SH, User Manual

Search results

Summary of Contents for DS-7104HGHI-SH

Reviews:

Related manuals for DS-7104HGHI-SH

Brands by name

Popular brands