HIKVISION DS-7104HGHI-SH User Manual Download Page 103

Page: 103 / 242

Digital Video Recorder User Manual

102

If several channels are triggered, clicking

button takes you to the synch playback interface. Check

checkbox to select one channel for playback or select multiple channels for synchronous playback.

The max. number of channels for synchronous playback supported varies to different models.

Figure 6. 6

Select Channels for Synchronous Playback

Event playback interface. You can select the main stream or sub stream from the dropdown list for playback.

The toolbar in the bottom part of Playback interface can be used to control playing process.

Figure 6. 7

Interface

of Playback by Event

Pre-play and post-play can be configured for the playback of event triggered record files.

Pre-play:

The time you set to play back before the event. For example, when an alarm triggered the

recording at 10:00, if you set the pre-play time as 5 seconds, the video plays back from 9:59:55.

Post-play:

The time you set to play back after the event. For example, when an alarm triggered the

Summary of Contents for DS-7104HGHI-SH



















































































































































































































































Search results

Summary of Contents for DS-7104HGHI-SH

Reviews:

HIKVISION DS-7104HGHI-SH, User Manual, Page: 103 / 242

Search results

Summary of Contents for DS-7104HGHI-SH

Reviews: