HIKVISION DS-7104HGHI-SH User Manual Download Page 121

Page: 121 / 242

Digital Video Recorder User Manual

120

Figure 8. 3

Set Trigger Camera of Motion Detection

Set arming schedule of the channel.

Select

Arming Schedule

tab to set the channel’s arming schedule.

Choose one day of a week and up to eight time periods can be set within each day. Or you can click the

Copy

button to copy the time period settings to other day(s).

Time periods shall not be repeated or overlapped.

Figure 8. 4

Set Arming Schedule of Motion Detection

Click

Linkage Action

tab to set up alarm response actions of motion alarm (please refer to

Chapter 8.7

Setting Alarm Response Actions

Repeat the above steps to set up arming schedule of other days of a week.

Click the

button to complete the motion detection settings of the channel.

If you want to set motion detection for another channel, repeat the above steps or just copy the above

settings to it.

You are not allowed to copy the “Trigger Channel” action.

Summary of Contents for DS-7104HGHI-SH



















































































































































































































































Search results

Summary of Contents for DS-7104HGHI-SH

Reviews:

Related manuals for DS-7104HGHI-SH

Brands by name

Popular brands

HIKVISION DS-7104HGHI-SH, User Manual

Search results

Summary of Contents for DS-7104HGHI-SH

Reviews:

Related manuals for DS-7104HGHI-SH

Brands by name

Popular brands