HIKVISION DS-7104HGHI-SH User Manual Download Page 102

Page: 102 / 242

Digital Video Recorder User Manual

101

Button

Operation

Button

Operation

Button

Operation

time line



The

indicates the start time and end time of the record files.



represents normal recording (manual or schedule); represents event recording (motion, alarm,

motion | alarm, motion & alarm).



Playback progress bar: use the mouse to click any point of the progress bar to locate special frames.

6.1.3

Playing Back by Event Search

Purpose:

Play back record files on one or several channels searched out by restricting event type (motion detection, alarm

input or VCA). Channel switch is supported.



Playback by alarm input search is not supported by DS-7100, DS-7200HGHI and DS-7200HQHI-E1/E2

series DVR.



DS-7100 does not support VCA type.

Steps:

Enter the playback interface.

Menu>Playback

Click

and select

to enter the Event Playback interface.

Select

Alarm Input

Motion

Line Crossing Detection

Intrusion Detection

as the event type, and specify

the start time and end time for search.

Figure 6. 5

Video Search by Motion Detection

Click

Search

, and the record files matching the search conditions will be displayed on a list.

Select and click

button to play back the record files.

You can click

Back

to return to the search interface.

If there is only one channel triggered, clicking

button takes you to Full-screen Playback interface of this

channel.

Summary of Contents for DS-7104HGHI-SH



















































































































































































































































Search results

Summary of Contents for DS-7104HGHI-SH

Reviews:

Related manuals for DS-7104HGHI-SH

Brands by name

Popular brands

HIKVISION DS-7104HGHI-SH, User Manual

Search results

Summary of Contents for DS-7104HGHI-SH

Reviews:

Related manuals for DS-7104HGHI-SH

Brands by name

Popular brands