Figure 2-35 Event Video Transfer via Email
2. Click the block to enable the function.
3. Enter the sender's information.
4. Enter the receiver's information.
5. Click Receiver Address Test and make sure the address is
correct.
6. Click Save.
Set Video Parameters
Steps
1. Click Video & Audio → Event Video Parameters to enter the
page.
Figure 2-36 Video Settings
2. Select a camera and set the video parameters.
Stream Type
Main Stream: Being used in recording and HD preview, it has
a high resolution, code rate and picture quality..
Sub-Stream: It is used to transmit network and preview
pictures as a video streaming with features of lower
resolution, bit rate and picture quality.
Note
For network camera supporting sub-stream, SMS video uses
sub-stream, and the configuration of main stream will not
effect on the SMS video.
Bitrate Type
Select the Bitrate type as constant or variable.
Resolution
Select the resolution of the video output
Video Bitrate
The higher value corresponds to the higher video quality,
but the better bandwidth is required.
2.3.5 System Settings
81
