Note
If the relay has linked to the wireless output module, the
wireless output module information will be displayed in the
Link Wireless Output Module area.
5. Click OK.
Note
After the relay is configured, you can click Status → Relay to
view the output status.
Siren
If you want to link the security control panel to a siren to report
an alarm when the alarm is triggered, you can set the siren
parameters.
Steps
1. Click Wireless Device → Siren to enter the Siren page.
Figure 1-22 Siren Page
2. Click to enter the Siren Settings page.
3. Set the siren name and the volume.
Note
The available siren volume range is from 0 to 3.
4. Optional: Enable Link Wireless Siren and set the siren serial
No.
Note
Some detectors may not support this function.
5. Click OK.
Note
After the siren is configured, you can click Status → Siren to
view the siren status.
Repeater
If the detector is far away from the control panel, set the repeater
parameters to enlarge the signal.
Steps
1. Click Wireless Device → Repeater to enter the Repeater page.
Figure 1-23 Repeater Page
21
