2. Click to set the repeater parameters.
Figure 1-24 Repeater Settings
3. Edit the repeater's name.
4. Enable Link Wireless Repeater and input the repeater serial
No.
5. Click OK.
Note
After setting the repeater, you can enter Status → Repeater to
view the repeater status.
Video Management
You can add two network cameras to the wireless security control
panel, and link the camera with the selected zone for video
monitoring. You can also receive and view the event video via
client and Email.
Add Cameras to the Security Control Panel
Steps
1. Click System → Network Camera to enter the network camera
management page.
Figure 1-25 Network Camera Management
2. ClickAdd, and enter the basic information of the camera, such
as camera name, IP address, and port No..
3. Enter the user name and password of the camera.
4. Click Save.
Note
You can add two network cameras for a wireless securty control
panel.
1. Optional: ClickEditorDeleteto edit or delete the selected
camera.
Link a Camera with the Zone
Steps
1. Click Wireless Device → Zone to enter the configuration page.
22
