Figure 2-3 Control Panel Management Page
2. Tap → Card/Tag Management to enter the Card/Tag
Management page.
3. Tap .
4. When hearing the voice prompt "Swipe Card", you should
present the card on the control panel card presenting area.
When hearing a beep sound, the card is recognized.
5. Create a card alias and tap Finish.
Note
The alias should contain 1 to 32 characters.
The card is displayed in the Card/Tag Management page.
Add Keyfob
You can add keyfobs to the control panel and control partition
arming/disarming status. You can also clear alarm when an alarm
is triggered.
Steps
Note
Make sure the keyfob's frequency is the same as the control
panel's.
1. Tap to enter the Add Keyfob page.
2. Follow the instruction on the page and press any key on the
keyfob to add.
3. Create a name for the keyfob and tap Finish.
The keyfob is listed in the Wireless Device page.
4. Optional: You can view the keyfob's serial No. and you can also
delete it.
Arm/Disarm the Zone
Arm or disarm the zone manually as you desired.
Note
Axiom security control panel supports one partition.
56
