The detector in the zone does not detect anything and you will
not receive any alarm from the zone.
Set Zone
After the detector is added, you can set the zone, including the
zone name, the zone type, zone bypass, linked camera, stay/away
status, the siren, and the silent zone. You can also view the
detector serial No. and the detector type of the zone.
Steps
1. Tap a zone in the Partition page to enter the zone settings
page.
Figure 2-6 Zone Settings Page
2. Set the following parameters as you desired.
Zone Type
Select a zone type from the zone type list. You can tap ? to
view each zones' definition.
Zone Bypass
Enable the function and the zone will be bypassed. No alarm
will be received while the zone is bypassed.
Link Camera
You can link the zone to cameras. When an alarm is
triggered, you can monitor the zone via the linked cameras.
Stay/Away
Enable the function and the zone will be auto bypassed
when the zone is in stay or away status.
Chime
Enable the function and the zone will be start audible alarm
when it is triggered.
Enable Silent Zone
Enable the function and no siren will be triggered if an event
or alarm occurs.
Set Arming/Disarming Schedule
58
