Figure 1-39 Zone Settings Page
2. Set the following parameters as you desired.
Zone Type
Select a zone type from the zone type list. You can tap ? to
view each zones' definition.
Zone Bypass
Enable the function and the zone will be bypassed. No alarm
will be received while the zone is bypassed.
Link Camera
You can link the zone to cameras. When an alarm is
triggered, you can monitor the zone via the linked cameras.
Stay/Away
Enable the function and the zone will be auto bypassed
when the zone is in stay or away status.
Chime
Enable the function and the zone will be start audible alarm
when it is triggered.
Enable Silent Zone
Enable the function and no siren will be triggered if an event
or alarm occurs.
Add a Camera to the Zone
You can link a camera to the zone to monitor the zone. You can
view the alarm videos when an alarm is triggered.
Before You Start
Make sure you have installed the camera in the target zone and
the camera has connected the same LAN as the security control
panel's.
Steps
1. Tap a security control panel on the Hik-Connect page and tap
Zone to enter the zone list page.
2. Select a zone to enter the zone settings page.
3. Tap Link Camera to enter the Link Camera page.
35
