ID3000 Series Smart Code Reader User Manual
62
Figure 8-48 Regular Expression Filter Mode
8.5.3 Set Result Format
Result format settings allow you to set the format and contents contained in the outputted barcode
information. Result format is related to communication protocol and trigger mode. With different
selected communication protocol and trigger mode, you need to set corresponding parameters.
Note
●
Result format settings are only available if you select Smart SDK, TCP Client, TCP Server, Serial,
FTP, Profinet, Melsec, Ethernet/IP, ModBus, Fins, and SLMP as the communication protocol
when the device mode is Normal.
●
For details about communication protocol, see section Communication Settings for details.
●
The specific parameter names and values may differ by device firmware versions.
Result Output via Smart SDK
When the communication protocol is Smart SDK, device mode is Normal and trigger mode is On,
you can set following parameters.
Sorting Rules
It decides the output order of codes, and you can select it according to actual demands.
One By One Enable
If it is enabled, the device will send one piece of code information each time in accordance with
the specified interval. You can set the interval via One By One Interval and the default value 100
ms.
