ID3000 Series Smart Code Reader User Manual
76
parameters according to actual demands.
Fins Communication Mode
It includes UDP or TCP.
Fins Local Port
It is 9600 by default.
Fins Dst IP
It sets the IP address of the target device.
Fins Dst Port
It sets the port of the target device.
Fins Data Format
It includes 16-bit or 32-bit.
Fins Scan Rate (ms)
It sets the interval that the device reads the server’s control register, and the unit is ms.
Fins Control Area
It is saved in DM area by default.
Fins Control Addr
You can set it according to actual demands. Make sure that each area cannot be overlapped and
covered.
Fins State Area
It is saved in DM area by default.
Fins State Addr
You can set it according to actual demands. Make sure that each area cannot be overlapped and
covered.
Fins Result Area
It is saved in DM area by default.
Fins Result Addr
You can set it according to actual demands. Make sure that each area cannot be overlapped and
covered.
