ID3000 Series Smart Code Reader User Manual
30
Figure 8-7 Manual Focus
8.1.5 Set Self-Adaptive Adjustment
Note
This function may differ by device models.
The function of self-adaptive adjustment can automatically adjust exposure, gain, Gamma and other
parameters to have a better code reading effect.
Steps
1. Right click the device in Device Connection, and click Feature Tree.
2. Go to Self Adapt Adjust, and select Adjust Mode.
●
High Quality: In this mode, the client software will adjust exposure in priority with small gain and
noise. The image quality is high, and this mode is applicable to the scenario for low speed
conveyer belt.
●
High Speed: In this mode, the client software will adjust gain in priority with small exposure and
large gain. The image quality is less high, and this mode is applicable to the scenario for high speed
conveyer belt.
3. Select Param Source according to actual demands.
●
Default Param: It adjusts the default parameters.
●
Polling Param: It adjusts parameters configured in polling.
4. (Optional) Enable or disable Lighting Adapt during self-adaptive adjustment. If it is enabled, the
client software will select the best one from all lighting options during the self-adaptive adjustment.
If it is disabled, the client software will keep the lighting status before the self-adaptive adjustment.
5. (Optional) Set Gain Max or Exposure Max according to actual demands.
●
Gain Max: It is enabled in high quality mode, and it sets the max. gain during the self-adaptive
adjustment.
●
Exposure Max: It is enabled in high speed mode, and it sets the max. exposure during the self-
adaptive adjustment.
6. (Optional) You can set Adjust Timeout to set the duration of the self-adaptive adjustment, and
the adjustment will stop if the duration is exceeded. The unit of Adjust Timeout is second.