P
PASCObot Body
ASCObot Body
PS-3318
What'
What's included
s included
1
2
3
4
5
6
FFeatur
eatures
es
1
2
3
4
5
6
7
Top frame
Top frame
1
Bottom frame
Bottom frame
2
Hold-down
Hold-down
Use the hold-down to secure the //control.Node to the bottom
frame.
3
Thumbscrew
Thumbscrew
Use the thumbscrew to secure the top frame to the hold-down.
4
2× Screws, 4-40×7/15"
2× Screws, 4-40×7/15"
Use these screws to secure the hold-down to the bottom frame.
5
4× Nuts, 5/16"
4× Nuts, 5/16"
Use these nuts to add weight to the bot to make the bot front-
heavy or back-heavy, depending on the application.
6
Screwdriver (not shown)
Screwdriver (not shown)
7
Top mounting holes
Top mounting holes
Use the four mounting holes on the top frame to mount
accessories such as the Gripper (PS-3225). Each hole accepts 4-40
screws.
1
//code.Node holder
//code.Node holder
Insert a //code.Node (PS-3231) to ride on the bot. The
//code.Node can be inserted facing the front or back of the bot.
2
//control.Node compartment
//control.Node compartment
Insert the //control.Node into the compartment with the
Bluetooth and battery status lights at the back of the bot. The
hole on the bottom of the frame provides access to the power
button and the USB port.
3
Mass compartment
Mass compartment
Use the two compartments in the front and the two in the back to
add mass to the bot. Adding masses helps to prevent the bot
from tilting back and forth while moving. Four nuts are included
with the bot to insert into the compartments.
4
Motor mounting holes
Motor mounting holes
Use these mounting holes to mount the High Speed Stepper
Motors to drive the bot. You can also mount any standard servo,
such as the Continuous Rotation Servo (SE-2977).
5
Hold-down mounting holes
Hold-down mounting holes
Use to mount the hold-down to the bot.
6
Module mounting holes
Module mounting holes
Use to mount the Line Follower or Range Finder modules to the
bot.
7
Product Guide
012-17242A
PASCObot Body | 1
