CoaXPress Area Scan Camera
·
User Manual
38
Table 10-1
Input Electrical Feature
Parameter Name
Parameter Symbol Value
Input Logic Level Low VL
0 VDC to 1 VDC
Input Logic Level High VH
3.3 VDC to 24 VDC
Input Rising Delay
TDR
1.8 μs to 4.6 μs
Input Falling Delay
TDF
16.8 μs to 22 μs
Make sure the input voltage is not from 1 VDC to 3.3 VDC as the electric status between these
two values are not stable.
The breakdown voltage is 30 VDC, and keep voltage stable.
10.1.2 Line 1 Opto-isolated Output Circuit
The Line 1 opto-isolated output circuit in camera I/O control is shown below.
GPO
Line 1+
Line 1-
Figure 10-3
Line 1 Internal Circuit
The maximum output current of Line 1 is 25 mA.
Logic 1
Output Level
Logic 0
Output Level
Internal
Logic
TDR
TDF
Figure 10-4
Output Logic Level
Summary of Contents for CoaXPress
