HikRobot CoaXPress, User Manual

Page: 34 / 102

CoaXPress Area Scan Camera
·
User Manual
24
Figure 8-8 Set Counter Trigger
When using counter trigger, you need to set relevant parameters of Counter And Timer Control.
Table 8-2 Description of Counter and Timer Control
Parameter Read/Write Description
Counter Selector Read and write It selects counter source. Counter 0 is available only
at present.
Counter Event Source Read and write It selects the signal source of counter trigger. Line 0,
Line 2 or Link Trigger 0 is available. This parameter
is disabled by default.
Counter Reset Source Read and write It selects the signal source of resetting counter.
Software is available only. This parameter is
disabled by default.
Counter Reset Write is available under
certain condition It resets counter and it can be executed when
selecting Software as Counter Reset Source.
Counter Value Read and write It is the counter value with the range of 1 to 1023.
Counter Current Value Read only It displays the number of executed external trigger.