English
57
1. Mounting the saw blade (
Fig. 33
)
Spindle Lock
5 mm screw
17 mm Box Wrench
Fig. 33
Spindle Cover
Washer (B)
10 mm Bolt
10 mm Bolt
Saw Blade
Washer (B)
Washer (A)
(1) Use the Phillips screwdriver to loosen the 5 mm screw fastening the spindle cover and then
turn the spindle cover.
(2) Press in spindle lock and loosen 10 mm bolt with 17 mm wrench (standard accessory).
Since the 10 mm bolt is left-hand threaded, loosen by turning it to the right.
NOTE
If the spindle lock cannot be easily pressed in to lock the spindle, turn the 10 mm bolt with
17 mm wrench (standard accessory) while applying pressure on the spindle lock.
The saw blade spindle is locked when the spindle lock is pressed inward.
(3) Remove the bolt and washer (D).
(4) Lift the lower guard and mount the saw blade.
WARNING
When mounting the saw blade, con
fi
rm that the rotation indicator mark on the
saw blade and the rotation direction of the spindle cover (Fig. 1 on page 36) are
properly matched.
(5) Thoroughly clean washer (B) and the 10 mm bolt, and install them onto the saw blade
spindle.
(6) Press in the spindle lock and tighten the 10 mm bolt by turning it to the left by standard
accessories (17 mm box wrench).
(7) Rotate the spindle cover unitl hook in spindle cover is in the original position. Then tighten
the 6 mm bolt.
000Book̲C12RSH2̲ChS.indb 57
000Book̲C12RSH2̲ChS.indb 57
2018/03/27 15:00:49
2018/03/27 15:00:49
