English
41
APPLICATION
Cutting various types of aluminium sash and wood.
PRIOR TO OPERATION
CAUTION
Make all necessary adjustments before inserting the plug in the power source.
1. Power
source
Ensure that the power source to be utilized conforms to the power requirements speci
fi
ed
on the product nameplate.
Do not use with direct current, or transformers such as boosters. Doing so may result in
damage or accidents.
2. Power
switch
Ensure that the power switch is in the OFF position. If the plug is connected to a receptacle
while the trigger switch is in the ON position, the power tool will start operating immediately,
inviting serious accident.
3. Extention
cord
When the work area is removed from the power source, use an extension cord of su
ffi
cient
thickness and rated capacity. The extension cord should be kept as short as practicable.
4. Remove all packing materials attached or connected
to the tool before attempting to operate it.
5. Releasing the locking pin (
Fig. 3
)
When the power tool is prepared for shipping, its
main parts are secured by a locking pin.
Move the handle slightly so that the locking pin
can be disengaged.
During transport, lock the locking pin into the
gear case.
6. Attach the dust bag to the main unit (
Fig. 1 on
page 36
)
Fig. 3
Handle
Locking Pin
000Book̲C12RSH2̲ChS.indb 41
000Book̲C12RSH2̲ChS.indb 41
2018/03/27 15:00:41
2018/03/27 15:00:41
