HID Fargo DTC1000Me Page 50 User Manual Download

Page: 50 / 84

Page 4-24

December 2016

Printer Preferences

PLT-01668, Version: 1.2

4.4.1

Advanced Settings

Click the

Advanced Settings

button to display the

Advanced Image Color

window.

Field

Description

Image Quality

Sharpness

Move the slider to the right to sharpen the image. Move the slider to the left to
decrease sharpness.

Contrast

Move the slider to the right to increase contrast in the image. Move the slider to the left
to decrease contrast.

Gamma

Move the slider to the right to increase gamma in the image. Move the slider to the left
to decrease gamma.

Balance

Yellow Balance

Move the slider to the right to increase the amount of yellow in the image. Move the
slider to the left to decrease the amount of yellow.

Magenta Balance

Move the slider to the right to increase the amount of magenta in the image. Move the
slider to the left to decrease the amount of magenta.

Cyan Balance

Move the slider to the right to increase the amount of yellow in the cyan. Move the
slider to the left to decrease the amount of cyan.

Default

Click the Default button to return all options to their factory settings.

Summary of Contents for Fargo DTC1000Me





















































































Search results

Summary of Contents for Fargo DTC1000Me

Reviews:

Related manuals for Fargo DTC1000Me

Brands by name

Popular brands

HID Fargo DTC1000Me, User Manual

Search results

Summary of Contents for Fargo DTC1000Me

Reviews:

Related manuals for Fargo DTC1000Me

Brands by name

Popular brands