Page 4-18
December 2016
Printer Preferences
PLT-01668, Version: 1.2
Dual Sided
Note:
The Dual Sided area is grayed out when the printer is single-sided only.
Print Both Sides
Select to automatically print the front and back sides of the card.
Split 1 Set of Ribbon Panels
– Select to automatically print the front and back
sides of the card using one ribbon panel.
Print Back Image on Front of Card
– Select to print the first page of a two-
page print file on the card’s backside. This option can also be used to print
black resin on a smart card’s chip side.
Note:
The second page of the file is printed on the card’s front side.
Print Back Side Only
Select to print only on the card’s back side.
Options
Rotate Front 180 Degrees
Select to change the orientation of the first page of the card design to
accommodate the location of a chip or RFID sensor.
Rotate Back 180 Degrees
Select to change the orientation of the second page of the card design to
accommodate the location of a chip or RFID sensor.
Disable Printing
Click to prevent the printer from printing.
Write Only
Select to use rewritable cards. The default setup is for the printer to first erase
the entire card and then write new information on the card. There is no option
to select specific areas to erase. However, to print or erase a section, use the
Overlay/Print Area tab. Select the specific area in the same manner as a print
job with a color ribbon. To erase many cards, use the FARGO Workbench Re-
Writable Card Eraser option. It does not print. It only erases.
Note:
No ribbon is used with rewritable cards. Do not load a ribbon into the
printer when using this process. Printing on a rewritable card with a ribbon will
ruin the card.
Invert F-panel Image
Select to change the portion of an image that is printed using a fluorescent film
panel.
Encrypt Job Data
Select to encrypt information about the print job for enhanced security.
Field
Description