Henny Penny Velocity OXE-100, Operation Manuals

Page: 99 / 118

Zigbee
Radio
87
IIN NF FO O: These messages only indicate if the Digi radio and control board are communicating. It
does not mean the Digi radio is communicating with the network.
4 4))
The bottom display reads JOIN = followed by a value. If the value reads 00, this means the
radio is joined to the network. Any other value means the radio is not joined to the network.
5 5))
Use the down arrow to navigate to the Channel Status screen. See Figure 10-14 Channel
Status Display, page 87 .
Figure 10-14 Channel Status Display
6 6))
The bottom display reads CHAN= and gives a value. If the radio is joined to a network, that
particular channel’s number displays. If the radio is not connected to a network, that value
reads 00.
7 7))
Use the down arrow to navigate to the PAN ID display screen. See Figure 10-15 Pan ID
Display, page 87 .
Figure 10-15 Pan ID Display
8 8))
The bottom display reads PAN ID followed by a value. If the radio is joined to a network, the ID
number displays. If the radio is not connected to a network, FFFF displays.