Henny Penny Velocity OXE-100, Operation Manuals

Page: 77 / 118

Programming
65
Program
Code
Display Description
3 3.. Press “X” to return to default or previous setting.
FC-14 POLISH: FILTER: TIME At the end of the Drop cycle, controls how long the fil-
ter pump runs for the specified filter time.
1 1.. Enter a new value by using the product numbers.
2 2.. Press “” to accept the new value.
3 3.. Press “X” to return to default or previous setting.
FC-15 POLISH: FILTER: DRAIN OPENING At the end of the Drop cycle, controls how far the
drain closes to a partially open position.
1 1.. Enter a new value by using the product numbers.
2 2.. Press “” to accept the new value.
3 3.. Press “X” to return to default or previous setting.
FC-16 POLISH: NORMAL FILL TIME The expected time it takes to refill the vat at the end
of a Polish operation. When refilling the vat, if the
fryer pumps for one and a half times this expected
time, the SLOW FILLING warning is activated, alert-
ing that the fryer is pumping more slowly than
expected.
1 1.. Enter a new value by using the product numbers.
2 2.. Press “” to accept the new value.
3 3.. Press “X” to return to default or previous setting.
FC-17 POLISH: FILL: NO DETECT: MAX
PUMP
If the fryer pumps for this amount of time during the
FILL phase without observing a temperature rise on
the upper temperature probe, the control turns the
pump off, and asks IS POT FILLED?. If pot is not
filled completely, press NO and the pump will attempt
to fill further.
1 1.. Enter a new value by using the product numbers.
2 2.. Press “” to accept the new value.
3 3.. Press “X” to return to default or previous setting.
A Au utto o T To op p O Offff S Se ettttiin ng gss