Henny Penny Velocity OXE-100, Operation Manuals

Page: 39 / 118

Cooking
27
C Ch ha ap ptte err 6 6 C Co oo okkiin ng g
6 6..1 1 S Stta arrtt--u up p
If the oil is below 180° F (82° C), with the Main Power switch in the ON position, the display flashes
START UP and AUTO MELT. The oil heats slowly to prevent scorching of the oil. The heat cycles on
and off to slowly heat the oil. When the oil temperature reaches 215° F (102° C), Auto Melt mode
terminates and the fryer begins heating up to the Auto Mix temperature of 360° F (182° C). During
Start-up, the display informs the user by displaying a bar graph to represent the stages of the start-up
process. These stages consist of the following:
• Melt (Mlt) - Auto Melt mode.
• Mix (Mix) - Automatic filter to ensure oil is mixed to prevent cold pockets.
• Top Off (Top) - Checks to see if oil level is filled to the proper mark. If the unit senses the oil level is
low, it completes an Auto Top Off.
• Polish (Pol) - The unit completes a polish cycle.
• During each stage, the bar graph fills as each stage
completes.
• The duration of each stage depends on the
temperature of the oil at the initial start and the
programmed setpoints.
• Once start-up is complete, the display goes to the main
cook menu and is ready for operations.
6 6..2 2 H He ea attiin ng g T Tiim me ess
Typical heating times and temperatures are as follows.
T Ta ab blle e 6 6--1 1 T Te em mp pe erra attu urre e a an nd d T Tiim miin ng g
Function Minutes Temperature Description
Melt 13 Min. 71 to 215 F (21 to 110 C)
Mix 7 Min. 325 F (162 C) Unit displays Insert Pan. Press X X to
delay 2 Min. When oil pan is detected,
oil drops to complete the mix.
Top 5 Min. Unit heats oil and checks level probe,
adds oil if needed.
Polish 2 Min. first polish
and 15 Min. for
each additional
polishes 325 to 360 F (162 to 182 C)