Henny Penny Velocity OXE-100, Operation Manuals

Page: 37 / 118

Oil
Maintenance
25
1 1.. Press 3. POLISH. A confirm prompt displays. If the
operator selects:
• NO x, the display returns to the previous menu.
• √ YES, the drain opens automatically and the oil begins
draining. Downward pointing arrows display indicating the
vat is draining.
A 15 minute timer displays and starts. The oil cycles
repeatedly through the drain pan filtration system until the
timer expires, ultra cleaning the oil, also referred to as a
polish.
When the polish cycle completes, the display indicates
that the oil is returning to the vat. The control panel chirps
and a timer starts. Once the timer counts down, IS POT
FILLED? displays.
If the unit does not detect the oil returning to the vat or if
the vat sensor detects the oil is below the full line the
message IS POT FILLED? displays. Check the oil level
to confirm the vat is full.
2 2.. If the oil is:
• Level with the hot fill line on the back of the vat, press √
YES.
• Not level with the hot fill line on the back of the vat, press
NO x and the filter pump motor runs for an additional 30
seconds.