Henny Penny Velocity OXE-100, Operation Manuals

Page: 79 / 118

Programming
67
Program
Code
Display Description
brought up to the proper level, the control beeps and
displays FILL OIL TANK.
1 1.. Enter a new value by using the product numbers.
2 2.. Press “” to accept the new value.
3 3.. Press “X” to return to default or previous setting.
FC-22 COOK MODE - FORCED ATO
CHECK AFTER ‘X’ COOKS
Controls the number of cook cycles before forcing a
check of the ATO.
1 1.. Enter a new value by using the product numbers.
2 2.. Press “” to accept the new value.
3 3.. Press “X” to return to default or previous setting.
S Stta arrtt--u up p M Mo od de e S Se ettttiin ng gss
FC-23 START-UP: NEEDED IF TEMP < ‘X’ If the oil temperature is below 215° F when the fryer
is turned on, the fryer always executes a Melt Mode
regardless of the Start-up Needed setting. Sets tem-
perature base to initiate a Start-up.
1 1.. Enter a new value by using the product numbers.
2 2.. Press “” to accept the new value.
3 3.. Press “X” to return to default or previous setting.
Phase 2 of the morning startup procedure is to execute the Start-up Mix operation: drop all of the
oil into the drain pan, filter it for a short time, and pump it back into the vat. This feature is important
in thermally mixing the oil to eliminate cold spots and eliminate the milky oil in the bottom of the pot.
FC-24 START-UP MIX: ENABLED? There are two choices; Mix or Daily. Mix controls
whether or not the Mix operation is performed auto-
matically or manually as part of a morning start-up.
Daily replaces the Mix with a Daily filter. Some opera-
tors may prefer performing a daily filter in the morning
instead of at night. Daily filter is manual only. The unit
prompts for a Daily filter during Start-up if selected.
Press the + or - button to select either Mix or Daily,
and if Mix, YES or NO to run automatically.