Henny Penny Velocity OXE-100, Operation Manuals

Page: 75 / 118

Programming
63
Program
Code
Display Description
the upper probe and the expected temperature rise is
observed.
1 1.. Enter a new value by using the product numbers.
2 2.. Press “” to accept the new value.
3 3.. Press “X” to return to default or previous setting.
FC-7 QUICK FILTER: NORMAL FILL TIME The expected time it takes to refill the vat at the end
of a Quick Filter.
1 1.. Enter a new value by using the product numbers.
2 2.. Press “” to accept the new value.
3 3.. Press “X” to return to default or previous setting.
FC-8 QUICK FILTER: FILL: NO DETECT:
MAX PUMP
If the fryer pumps for this amount of time during the
Fill phase without observing a temperature rise on
the upper temperature probe, the control turns the
pump off, and asks IS POT FILLED?.
1 1.. Enter a new value by using the product numbers.
2 2.. Press “” to accept the new value.
3 3.. Press “X” to return to default or previous setting.
D Da aiillyy F Fiilltte err S Se ettttiin ng gss
IIN NF FO O:
• In a Daily Filter, a FILL operation can be stopped by the user at any time.
• For very thin (low viscosity) cooking oils, drain opening setting may need to reduce from the default value
and you might need to reduce the drain opening setting from the default value.
• For 50 Hz systems, or if the control routinely gives up before the pot is refilled, you might need to
increase the max pump time from the default value–50 Hz pumps may run more slowly than 60 Hz
pumps.
FC-9 DAILY FILTER: DROP OIL: TIME During the Drop cycle, controls the duration of time
the vat drains.
1 1.. Enter a new value by using the product numbers.
2 2.. Press “” to accept the new value.
3 3.. Press “X” to return to default or previous setting.