Henny Penny Velocity OXE-100, Operation Manuals

Page: 100 / 118

Zigbee
Radio
88
9 9))
Use the down arrow to navigate to the Radio Short ID display screen. See Figure 10-16 Radio
Short ID Display, page 88 .
Figure 10-16 Radio Short ID Display
1 10 0))
The bottom display reads RADIO followed by a value. If the radio is joined to a network, that
particular radio module number displays. This varies for each radio and may change if the radio
is unjoined and then rejoined to a network. If the radio is not connected to a network, FFFF
displays.
1 11 1))
Use the down arrow to navigate to the Reset/Unjoin Command display screen. See Figure 10-
17 Reset/Unjoin Command Display, page 88 .
Figure 10-17 Reset/Unjoin Command Display
1 12 2))
The bottom display reads RESET followed by a value. if the value is 00, no reset is required, or
the requested reset has been completed. If the value is 01, a reset is pending.
1 13 3))
To reset, press and hold the button next to RESET. The display counts down.
1 14 4))
Once the count-down has expired, release the button and the radio now shows 01 for the reset
code. The 01 remains until the radio completes the reset operation, then the code changes
back to 00.
1 15 5))
Press and hold the menu button to exit out of Info Mode.