Henny Penny PFG-691, Technical Manual

Page: 152 / 184

3-10. CHANGING THE FILTER 8. Remove the clips and discard the envelope.
ENVELOPE (Continued)
9. Clean the top and bottom screen with soap and
water. Rinse thoroughly with hot water.
and the standpipe are thoroughly dry before assembly of
10. Assemble the top screen to the bottom screen.
11. Slide the screens into a clean envelope.
12. Fold the corners in and then double fold the open end.
13. Clamp the envelope in place with the two retaining
clips.
14. Replace the crumb catcher screen on top of the paper.
Screw on the suction standpipe assembly.
15. Place complete screen assembly back into drain
pan, replace clean crumb basket, and slide pan back into
place beneath the fryer.
16. Connect the union by hand. Do not use a wrench to
tighten.
17. Slide the condensation drain pan back into place. The
fryer is now ready to operate.
Inspection 20
Rev A