Henny Penny PFG-691, Technical Manual

Page: 156 / 184

3-9. FILTERING INSTRUCTIONS 7. Turn COOK/PUMP switch to PUMP.
(Continued)
8. When all shortening has been pumped into frypot turn
COOK/PUMP switch off.
IF THERE ARE AIR BUBBLES COMING UP IN
THE SHORTENING, IT’S POSSIBLE THAT THE
FILTER CONNECTION AT THE UNION ON THE
FILTER TUBE IS NOT TIGHTENED PROPERLY.
IF SO, TURN OFF THE PUMP AND USE PROTEC-
TIVE CLOTH OR GLOVE WHEN TIGHTENING
THE UNION. THIS UNION WILL BE HOT AND
SEVERE BURNS COULD RESULT.
3-10. CHANGING THE FILTER The envelope should be changed after 10-12 or
ENVELOPE whenever it becomes clogged with crumbs. Proceed as
follows:
1. Move the COOK/PUMP switch to the OFF position.
2. Remove and empty the condensation drain pan.
3.
Disconnect
the union and remove the drain pan
from beneath the frypot.
Use protective cloth or glove when disconnecting the
care to prevent splashing, or severe burns could
result.
4. Lift the screen assembly from the drain pan.
5.
Wipe the shortening and crumbs from the
drain pan.
Clean the
drain pan with soap and water.
Thoroughly rinse with hot water.
6.
Unthread the standpipe from the
screen assembly.
7. Remove the crumb catcher and clean thoroughly with
hot water.
Inspection 21
Inspection 22
Rev A