Henny Penny PFG-691, Technical Manual

Page: 16 / 184

Model 691
1-10
Problem Cause Correction
SHORTENING FOAMING/DRAINING SECTION
Foaming or boiling
•
Water in shortening
•
At end of cook cycle,
over of drain shortening and clean
shortening frypot; add fresh
shortening
•
Condensation line clogged
•
Remove and clean conden-
sation line
•
Improper or bad shortening
•
Use recommended
shortening
•
Improper filtering
•
Refer to the procedure
covering filtering the
shortening
•
Cold zone full of cracklings
•
Filter shortening
•
Improper rinsing after
•
Clean and neutralize the
cleaning the fryer frypot; rinse with vinegar
to remove the alkaline, then
rinse with hot water and
dry frypot
Shortening will
•
Drain valve clogged with
•
Open valve, push cleaning
not drain from crumbs rod through drain opening
frypot from inside of frypot
•
Drain valve will not open by
•
Replace cotter pins in valve
pulling the handle coupling
Shortening leaking
•
Obstruction in drain
•
Remove obstruction
through drain valve
•
Faulty drain valve
•
Replace drain valve
1-3. TROUBLESHOOTING (Continued)
Sept. 2004