8.
Care and Maintenance
8.1 Care
This unit should be stored in a level, dry location at ambient condition out of direct sunlight.
8.2 Maintenance
To minimize wear of the slide assembly, periodically apply several drops of light machine oil to
the slide rods, manually advance and retract the slide several times then remove the excess
lubricant using a rag.
Warning!
Be sure to press the “EMERGENCY STOP” button before lubricating the slide
rods.
Clean, dry, filtered air must be used. If it is not, the solenoids in the controller will be fouled
over time.
Notice:
If the required air quality is not achieved, install a Loctite filter regulator. In the
US order a 5
µ
m filter using Part Number 985397. In Europe or Asia, order a 10
µ
m filter using
Part Number 97120.
37
